Vibrocontrol 1800 Series

Features of each VIBROCONTROL 1800 series vibration monitoring module include:

Overall vibration measurement according to ISO10816 (or Shaft vibration according to API670)
Time waveform recording and data storage
4 configurable outputs, either as 4-20mA, or as alarm limit relays
Up to 24 additional relay outputs via VC-1801 modules
OK - monitoring of supply voltage, microprocessor and vibration sensor with relay output
Cost-saving installation, either on DIN rail or in optional housing
Connection to either:
- Standard CCS current driven accelerometers (Vibrocontrol 1850)
- Velocity transducers (Vibrocontrol 1860)
- Displacement transducers(Vibrocontrol 1870)
RS232 serial interface, and
RS485 serial interface with multidrop for connection of multiple devices including Vibrocontrol 950 and 960
Network connection via Vibrocontrol 1803 etherbridge module or Vibrocontrol 1804 etherbridge module with local storage
Live output of measured value and limit violation is available via serial interfaces or network
Setup / configuration by direct USB connection or network to Laptop/PC
Download, visualisation and analysis of machine vibration data from local or remote PC

Data Sheet [pdf]

Instruction Manual - 1850 - 1860 1870 Series

Compact Analyzer v2.34.10.0

Features of VIBROCONTROL 950 and Vibrocontrol 960 Bearing/Housing vibration monitoring units include:

Overall vibration measurement according to ISO10816 with live digital display
4-20mA output for overall vibration level
Two alarm limit relays for vibration warning and danger levels with limit violation display
OK - monitoring of supply voltage, microprocessor and vibration sensor with relay output
Cost-saving installation, either on DIN rail or in optional housing
Connection to either:
- Standard CCS current driven accelerometers (Vibrocontrol 950)
- Velocity transducers (Vibrocontrol 960)
RS232 serial interface, and
RS485 serial interface with multidrop for connection of multiple devices
Live output of measured value and limit violation is available via serial interfaces
USB to serial convertor and software for connection to PC / lap-top are included in the scope of delivery.
Setup / configuration by connection of Laptop/PC

Vibrocontrol 950 and Vibrocontrol 960 are the (almost) direct replacements for Vibrocontrol 920. BVE can support the transition from VC-920 to VC-950 and VC-960. A document showing the differences is available here.

Data Sheet [pdf]

Instruction Manual

Vibrocontrol 920 is no longer manufactured in high volume production and will be supplied mainly as spare parts.

VC-920 is replaced by the new products Vibrocontrol 950 or Vibrocontrol 960 and we offer to assist in the transition to the correct replacement.
The differences between VC-920 and VC-950 /VC-960 are detailed in the linked Installation comparison VC920 versus VC950/VC960.

Supplying us with a photo that shows the terminal connections, and/or a wiring connection drawing will allow us to select the correct replacement.

Uninterrupted and safe production and high machine up-time require a permanently installed monitoring strategy. VIBROCONTROL 6000® Compact monitor belongs to a new, revolutionary generation of measuring and diagnosis devices that adapt easily to customer requirements for machine safety and up-time, thanks to a flexible hardware and software concept. There are over 200 powerful and price-optimized standard monitoring solution packages available for this instrument.

The VC-6000® Compact monitor can also easily adapt to your monitoring needs – please contact us to find out more about the ideal parameter configuration for your machinery!

Overview of your VIBROCONTROL 6000® Compact monitor benefits:

Provides online condition monitoring and safety capability
More than 200 standard machine monitoring applications are available
Customer-tailored monitoring solutions can easily be realised
Serves as stand-alone instrument or as part of plant-wide safety system with a PC interface
It can be mounted in a cabinet rack in the instrument room or field installed near the machine in an external protective housing

Data Sheet [pdf]

Instruction Manual

Vibrocontrol VC-1500 is a powerful low-priced solution for 2 channel measurement and monitoring of

Casing vibration
Rolling-element bearing condition
Temperature

Either 1 or 2 bearings of your machine can be monitored simultaneously.

A wide range of standard current driven accelerometers can be connected, including AS-063, AS-063.

Temperature can be measured either with a seperate PT100 RTD, or from the integrated sensor provided with the sensor AS-062/T1.

Vibration monitoring
Measurement of casing vibration is in accordance with the ISO Standard 10816. The two actual measured values are shown in the display, as well as their percentage values with respect to the set limit setpoint. A violation of the preset limit values is signalled visually (LED) as well as through the built-in relays for Alert and Danger alarms.

Rolling-element bearing condition monitoring
For acquiring the rolling-element bearing condition, a DFT of the sensor signal in the range 500 to 5000 cycles per second is performed, and the sum of the largest RMS value of vibration acceleration is formed. A comparison with the measured value of the measured value of the bearing (in as new condition), the "Bearing Condition Value" is displayed.

Trend measurement
provide you with an overview of the measurement trend, the VC-1500 has a trend measurement function for the casing vibration, rolling-element bearing condition and temperature. The display is provided right at the instrument over a selectable period between 10 days and 10 months.

Data Sheet [pdf]

Instruction Manual

Our Products

Contact Us

Don Bailey
Sales and Service
0419 464 246

Peter Bailey
Technical Support
0450 052 086

Office
02 9894 1001